Sony ICF-SW100S Manual De Instrucciones página 27

1 Display the label you want to edit. by way of the praset
tuning (see page 16) or the worldtime clock (see page 15)
2 Press LABEL EDIT. The first character of the label flashes.
3 Press the inner buttons of JOG/MANUAL TUNE/SCAN to
move the cursor to the character which you want to edit.
4 Press the desired PRESET/DIRECT TUNE button to enter the
character. The characters upper-left of each PRESET/DIRECT
TUNE button shows the character which is entered by pressing the
button. Every press of the button changes the character as follows.
Ex. Pressing the PRESET/DIRECT TUNE 1
A->B—C—1
| |
ABC1 DEF2]GHI3
KL4 MNOS | PQR6
STU7 VWX8 | YZ—9
aon Es
+- *. <>/0
5 Fix all characters of the label which you want to edit.
During editing characters, you should press a button within 15
seconds after pressing the precedent button.
6 Press EXE. Beep sounds and the displayed characters are preset as
the label.
* _. indicates
space character.
To preset a station with the label When you edit a label of time
When a @ mark is displayed in the difference
preset memory display, you can preset a If you have already changed the label of
label by simply aditing it. another time difference, it is canceled
You can also preset a label together with and returned to the original label.
1 the frequency when presetting a station.
i Perfrom the following procedure.
1 Tune in a station by way of direct
tuning (see page 18), manual tuning
(see page 20) or scan tuning (see page
22).
2 Edit the Ibel by the above steps from 2
to6.
3 Preset the station by the steps 4 and 5
in the "Presetting a Station (page 24)".
' The label displayed will be stored in
memory together with the frequecy.