Panasonic CA-TU7000U Manual De Instrucciones página 15

Monitor Position Adjustment
Cautions:
e For smooth adjustment, make sure to first return the lateral angle to the neutral position and then adjust the tilt angle.
e Do not manually change the position of the unit by using force.
E
N
G
L
|
S
H
6
Tilt Angle / Front-Rear Position
TILT] O Press and hold [TILT] on the display unit for more than 1 second.
— == - TILT/SLIDE
WAT TILT OBE IDE
[NIV]
2173
FRONT REARS
[<] [>] (Adjust)
Monitor Position Setting Menu
Press LA] or [V] to adjust the tilt angle. Press [<] or [>>] to
move the display to the front or rear position. LA [V] l :
[<] [>] (Adjust) Tilt Angle Front-Rear Position
Rear
[>]
Position "REAR" and tilt angle "5*
cannot be selected at the same time.
Notes:
e Press [MODE] to return to the regular mode.
e The monitor position setting menu is automatically closed if no operation is performed for about 60 seconds.
e Vertical angle (TILT) and front-rear position data are saved in the memory, so when the display unit is drawn out
next, it is automatically set at the angle and in the position adjusted before.
e After adjusting its angle, also adjust the brightness to make it easy for you to watch. (=> page 38)
e The display position can also be set on the main menu screen. (= page 30)
DER Unit Lateral Angle Adjustment
Hold the display unit by the non-slip part in the
upper half of it, and adjust its lateral angle.
Caution: There is the danger of your fingers being
pinched if you hold the unit by lower part. Hold the unit
by the upper haif of it, and move it carefully without
applying undue force.
Folding Down the Display Temporarily
Fold Down: Press [TILT] on the display unit.
Raise : Press [TILT] again on the display unit.
Note: Even when the unit is power off, you can fold down the display temporarily.
Caution: Do not place any object on the display unit, or subject it to undue force.
15
CA-TU7000U