Panasonic CA-TU7000U Manual De Instrucciones página 25

I^
Press [MODE] to change to the VTR1 or VTR2 mode.
ue" oO
Select the same mode (VTR1 or VTR2) as the terminal that is
Camcorder
connected to a VCR or Camcorder (VTR1-IN or VTR2-IN).
This Unit with Sar
CY-vMc7goou 122098890000
Control Unit 00000000 0%
(Example)
Rear View Camera
Co)
ac»
Shift the transmission gear into the reverse position.
The display shows a picture from the rear view camera.
Notes:
e You can see a picture from the rear view camera even if the
power of the display unit is inactivated.
e You can see a picture from the rear view camera if you change
the mode to the same one (VTR1 or VTR2) as the terminal to
which the rear view camera was connected (VTR1-IN or VTR2- METODO o
IN).
Control Unit
00000000
o®
@ Press and hold [MENU] for more than 2 seconds.
REAR MONITOR
(Example)
Rear Seat
Monitor
<y: SELECT ENTERISET
FAUTO VTR1 VTR2
aa]
Rear Monitor Setting Menu
Press [>] or [<] to select an item.
AUTO : Picture and sound come out. These are in the VIDEO-OUT
same mode as the front seat monitor.
VTR1 |: Picture and sound in the VTR1 mode always o
come out. 60000000 00
VTR2 : Picture and sound in the VTR2 mode always This Unit with
come out. CY-VMC7000U
Control Unit
© Press [ENTER] to set.
Notes:
e Press [MENU] or [MODE] to return to the regular mode.
e The display returns to the previous one if there is no operation for 60 seconds, after changing to the rear monitor
setting menu.
e Picture and sound from the car navigation system connected to an RGB are not available at the rear monitor.
e The sound in the CD, radio and CD changer modes is not available at the rear seat monitor.
e You can mute the sound from the rear speakers connected to the front seat monitor, so that you can have differ-
ent modes at the front seat monitor and the rear seat monitor. (=> page 28)
25
CA-TU7000U