Eaton TRIPP LITE Serie Manual Del Propietário página 4

Installation
Notes:
• The maximum distances referenced in these instructions have been tested at a
UHD 4K x 2K video resolution of 3840 x 2160 @ 24 Hz and 30 Hz with 36-bit
(12 bits per channel) Deep Color using 28 AWG (0.08 mm2) HDMI cables.
Longer distances between the splitter and connected monitors are achievable
using 24 AWG (0.2 mm2) HDMI cables.
• When connecting monitors that support different maximum resolutions, the
video resolution displayed will be limited to the lowest maximum resolution. For
example, if connecting a combination of 1080p and 4K x 2K monitors, a 1080p
video resolution will be displayed on all screens.
1. Make sure the power to all devices you will be connecting is turned off.
2. Connect the HDMI source to the Input port on the splitter.
Note: The length of the HDMI cable connecting the source to the splitter must not exceed
16.4 ft. (5 m).
4
07-727-9336A7.indb 4 07-727-9336A7.indb 4
Source
B118-008-UHD
3/4/2024 4:25:24 PM 3/4/2024 4:25:24 PM