JOCCA 2356 Manual De Instrucciones página 6

EN English
INSTRUCTIONS FOR USE
Assembly and conditioning of the appliance:
- Before assembling the appliance, make sure that the speed control
buttons are not selected and that the appliance is disconnected from the
mains supply.
- The fan has three speeds: slow (1), medium (2) and fast (3), and a button
to stop the fan (O).
- If you want the fan to rotate automatically from left to right, press the
oscillation button downwards. If you want the airflow direction to be fixed,
pull the oscillation button upwards.
- You can also adjust the tilt angle of the fan head within a range of 40
degrees.
Assembly of the base and mount
- Insert the plastic base trim into the outer tube and place the height
regulator.
- Insert the inner tube into the outer tube and turn the height regulator
clockwise to adjust the fan height by pulling out the inner tube to the
desired height.
- Turn the height regulator clockwise to adjust the fan height by pulling out
the inner tube to the desired height.
- Screw the outer tube to the round base.
- Place the fan motor in the inner tube.
- Tighten the knob at the rear to secure the motor to the base.
Assembly of the blades
1. Loosen the cover of the blades (blue part)
2. Attach the rear protective grille by fitting the sticks into the holes in
the grille.
6