4. Insert the ash container carefully without spilling any water, and attach the front cover.
5. Navigate to the "Service" menu and then "Steam cleaning"
6. The water will start to boil and the steam will clean out any debris in the catalytic converter. This system
cleaning will normally take 60–80 minutes.
1
4
NOTE!
Do not use the toilet during the maintenance procedure, as this will impair the function of
the cleaning. The toilet can be used when the toilet returns to standby mode.
4.2.3 CLEANING THE BOWL
Recommended frequency: as required for cleanliness and when emptying the ash container.
To clean the bowl:
1. Navigate the main menu to the "Service" sub menu and choose "clean toilet" (see section 3.6.3)
2. Open the seat and lid
3. Use moist paper, water and a mild cleaning agent as required. Close the lid and start the incineration
1
DANGER!
•
•
WARNING!
•
•
CAUTION!
Do not use chlorine-based cleaning agents to clean the bowl. Chlorine is extremely harmful
for the catalytic converter and if put into the toilet it may cause the catalytic converter to
malfunction.
22
2
5
2
Do not use flammable cleaning agents to clean the bowl.
The toilet needs to be cooled and in standby mode before cleaning the bowl.
Some metal edges may be sharp
Only the lid has soft-close, make sure to avoid damaging your hands.
3
6
60–80 minutes
60 - 70 minutes
3