Cinderella JUBILEE EM03CS10 Manual Del Usuario página 7

2.3 ORIGINAL INSTALLATION PACKAGES FOR YOUR CINDERELLA TOILET
Cinderella Original Installation Kit: We strongly recommend the use of the "Cinderella Original Installation Kit"
when installing you appliance. This complete set includes necessary parts for an ideal installation, optimizing
the incinerating process and functionality of your toilet. The installation kit includes two separate boxes. Box no.
1 includes an optimized flue cowl and elbow, for increasing the system flow rate and incineration efficiency. It
also contains a storm collar for the inlet air, as well as clamps to support the installation of the pipes. Box no 2
includes 5 x 1066 mm and 2x 500 mm UV stabilized PP quality pipes - for installing the inlet and outlet ventilation.
4
5
6
CINDERELLA INSTALLATION KIT BOX 1
1 Storm Collar
2 Wall mount rod
3 Support clamp
4 Elbow, 87° w/drain
5 Flue Terminal Cap
6 Threaded rod, 30 mm
NOTE!
• This manual will further explain and demonstrate how to optimally install your toilet,
based on the parts included in the Original Cinderella Installation Kit. Should you desire
to install your Cinderella appliance with other than our original pipes and parts, be sure
that they comply with the specifications described under section 2.4.1 "parts and
material specifications".
• In order to guarantee your Cinderella Incineration Toilet functions properly, It is
essential to ensure proper ventilation in accordance with the guidelines in this
manual. Installations deviating from the manufacture specifications or the use of
non-authorized parts in the installation of the appliance will cause malfunction, wear
or odors and will void the warranty.
2.4 INSTALLATION SPECIFICATIONS
2.4.1 SPECIFICATIONS PARTS AND MATERIALS
ITEM
Ventilation pipes
Elbow (Outlet air)
1 2
9
QTY
1
3
3
1
1
3
SPECIFICATIONS
Cinderella Jubilee is required to be installed with 110 mm pipes with a smooth inner
surface and a minimum inner diameter of 102 mm. The pipe material must be
specified for temperatures over 100° C and preferably of a PP- or CPVC- type. We
strongly recommend using the Original Cinderella PP- quality pipes.
Cinderella Jubilee is required to be installed with a smooth curved elbow that
minimizes the restriction of the air flow. We strongly recommend using the Original
Cinderella Elbow 87° w/ drain.
1
3
2
CINDERELLA INSTALLATION KIT BOX 2
1 Male-Female 1066 mm flue pipe
2 Male-Male 500 mm flue pipe
QTY
5
2
7