Publicidad
Idiomas disponibles
Idiomas disponibles
7.2 Energy save mode
Energy save mode lowers the heating tem-
perature and switches off the illumination.
In the menu under Settings > Energy save
mode, you can set the time after which
the appliance should switch to energy
save mode. You can select defined values
between 3 minutes and 4 hours.
You cannot deactivate the function. After
4 hours without being operated at the
latest, the appliance switches to energy
save mode.
If the appliance is in energy save mode,
you can wake it up by pressing the "rotary
regulator" briefly.
7.3 Automatic switch-off
If the appliance is not operated for a long
time, it switches off automatically after a
specified period of time.
In the menu under Settings > Auto OFF
you can set after what period of time the
appliance should switch itself off. You can
select defined values between 9 minutes
and 8 hours.
You cannot deactivate the function. After
8 hours without being operated at the
latest, the appliance switches off.
7.4 Switch-off rinsing
The appliance performs rinsing when
switched on and off.
In the menu under Settings > Rinse at OFF,
you can deactivate the switch-off rinsing
function or activate it again.
We recommend that you do not perma-
nently deactivate the switch-off rinsing
function.
7.5 Factory settings
In the menu under Settings > Factory
settings, you can reset the appliance to
factory settings. In this case, all personal
settings are lost, including the settings in
the Profile menu.
7.6 Statistics and System
menus
The Statistics menu provides information
on the number of beverages prepared.
The System menu provides information
on the software version. Furthermore, you
have access to the venting function (see
section 9, page 30).
7.7 Grinding fineness
The grinding fineness of the coffee beans
influences the flavour of the coffee. The
finer you set the grinding fineness, the
stronger the coffee.
The grinding fineness has been optimally
set at the factory. Change the grinding
fineness setting at the earliest after about
100 coffee dispensing processes (after
approx. 1 month, depending on coffee
consumption).
You can set the grinding fineness optimally
with the "Grinding fineness adjustment"
lever on the rear side of the appliance.
Do not set the grinding fineness too fine.
The optimum grinding fineness is set when
the coffee flows evenly out of the outlet
producing a fine, dense crema.
8 Care and
maintenance
Regular cleaning and maintenance of the
appliance guarantee the consistent high
quality of your beverages.
Clean all parts and surfaces that come into
contact with coffee, beans, milk and water
on a regular basis.
Attention! Unsuitable cleaning agents
can damage the appliance. Only use the
recommended cleaning agents.
8.1 Cleaning surfaces
Use a soft, damp cloth and a little washing
up liquid to clean the surfaces. Remove
external soiling immediately.
Care and maintenance
27
Publicidad
