Descargar Imprimir esta página

melitta LatteSelect F630-211 Manual De Instrucciones página 30

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 79
Drying out
Caution! Descaling agent causes eye
irritation. If it accidentally comes into
contact with your eyes, you should
rinse them with clear water for several
minutes. Consult a doctor if symptoms
persist.
Use the coffee grounds container as a
collecting container. The program takes
approximately 15 minutes and should not
be interrupted.
You can access the program by navigating
to Care > Descale appliance in the menu.
Thoroughly rinse out the water tank and fill
it with fresh tap water after descaling.
8.10 Setting the water
hardness
The hardness of the tap water influences
how often you have to descale the appli-
ance. The harder the tap water, the more
frequently you have to run the Descale
appliance program.
Determine the water hardness with the
enclosed test strip. Observe the instruc-
tions on the test strip and the information
in the following table.
You can set the water hardness by navi-
gating to Settings > Water hardness in the
menu.
Water hardness
°d
Soft
0 to 10
Medium
10 to 15
Hard
15 to 20
Very hard
> 20
8.11 Using a water filter
The use of a water filter extends the service
life of your appliance. The water filter filters
calcium and other pollutants out of the tap
water.
If you use a water filter and change it on a
regular basis, you will need to descale the
appliance only once per year. This informa-
tion is based on an average of six 120 ml
coffee beverages per day and six filter
changes per year.
30
°e
°f
0 to 13
0 to 18
13 to 19
18 to 27
19 to 25
27 to 36
> 25
> 36
Only use Melitta® Pro Aqua filter cartridges
for automatic coffeemakers. Observe the
instructions on the packaging of the filter
cartridge.
Use the screwing aid to screw the water
filter into and out of the water tank.
Inserting the water filter
Change the water filter when the appliance
asks you to do so. Use the coffee grounds
container as a collecting container.
Place the new water filter in a vessel
ƒ
filled with fresh tap water for a few
minutes.
Navigate to the Care > Filter > Insert filter
ƒ
menu.
Changing the water filter
Use the coffee grounds container as a
collecting container.
Navigate to the Care > Filter > Change fil-
ƒ
ter menu.
Removing the water filter
Navigate to the Care > Filter > Remove
ƒ
filter menu.
Then adjust the water hardness (see
ƒ
section 8.10, page 30).
9 Drying out
During drying out, residual water is
removed from the appliance. You should
dry out the appliance whenever you do
not use it for longer periods, if you want to
transport it or if there is a risk that it could
freeze.
If the water filter is inserted, you will need
to remove it from the water tank before-
hand.

Publicidad

loading

Este manual también es adecuado para:

Latteselect f630-212