Publicidad
Idiomas disponibles
Idiomas disponibles
Problems
13 Problems
Contact our hotline if the actions listed below fail to rectify the problems or if other prob-
lems not listed here occur.
You will find the telephone numbers (local rates) in the lid of the water tank or in the
Service section on our website.
Problem
Coffee only emerges
from the outlet in drips.
Coffee does not flow
through.
Grinder does not grind
coffee beans.
The Refill beans display
appears although the
2-chamber bean con-
tainer is full.
Loud grinder noise.
Brewing unit cannot be
inserted after removing.
System error appears on
the display.
32
Cause
Grinding fineness too fine.
Appliance soiled.
Appliance is covered
inside with limescale.
Water tank not filled or
inserted incorrectly.
Brewing unit clogged.
Coffee beans do not drop
into the grinder.
"Bean Select" tilt lever is
positioned vertically.
Coffee beans are too oily.
Foreign object in the
grinder.
Coffee beans do not drop
into the grinder. Insuffi-
cient ground coffee beans
in the brewing unit.
Foreign object in the
grinder.
Brewing unit is not cor-
rectly locked.
Drive is not in the correct
position.
Software problem.
Action
Set a coarser grinding fineness (see sec-
ƒ
tion 7.7, page 27).
ƒ
Clean the brewing unit (see section 8.2,
page 28).
Run the Clean coffee system program (see
ƒ
section 8.8, page 29).
Descale the appliance (see section 8.9,
ƒ
page 29).
Fill the water tank and ensure it is posi-
ƒ
tioned correctly (see section 4.1, page
23).
Clean the brewing unit (see section 8.2,
ƒ
page 28).
Tap lightly on the 2-chamber bean con-
ƒ
tainer.
Clean the 2-chamber bean container.
ƒ
Move the tilt lever to the left or right.
ƒ
Use different coffee beans.
ƒ
Contact the hotline.
ƒ
Tap lightly on the 2-chamber bean con-
ƒ
tainer.
ƒ
Press direct key.
Contact the hotline.
ƒ
Check that the handle for the brewing unit
ƒ
locking mechanism is correctly engaged
(see section 8.2, page 28).
Press and hold the brewing strength
ƒ
button. Also press the "On/Off" button for
longer than 2 seconds. Release the buttons
again. The appliance then initialises.
Switch the appliance off and on again.
ƒ
Contact the hotline.
ƒ
Publicidad
