3.1
HYGROTHERMAL COMFORT IN THE
INDUSTRIAL AND COMMERCIAL
SECTORS
Reliability and energy efficiency at the top of its category
The AREO i series is equipped with brushless inverters (EC) inte-
grated with the motor, which guarantees accurate adjustment
of the rotation speed and maximum adaptability to real-time
thermal load.
Innovative Inverter technology makes it possible to achieve an
exceptional degree of aeraulic efficiency and a consequent re-
duction in seasonal power consumption of up to 50% in com-
parison to the traditional version with AC motor.
The rounded shape of the cabinet gives the product an especial-
ly unique design.
The AREO i range consists of 35 models to be wall mounted.
AREO i is ideal for both heating and cooling due to an innova-
tive system for collecting condensate and additional insulation
inside the cabinet.
The range includes 6 different construction sizes that are also
available with 4-row heat exchangers to allow proper operation
with hot water produced by the heat pump.
3.2
MAIN COMPONENTS
Structure
Made of pre-painted steel sheet, complete with ABS corners. In-
ternally insulated to prevent the formation of condensation on
the cabinet during operation with chilled water.
The cabinet is complete with adjustable pre-painted sheet steel
louvers (spring operated) placed on the air outlet which enable
an optimal distribution of air within the room.
On the rear of the cabinet there are 4 for suspending the fan
heater from the ceiling or joining it to the mounting board for
installation on the wall (accessory DFC, DFP or DFO).
Heat exchanger
High conductivity heat exchanger made with copper piping and
aluminium fins assuring higher heat exchange than standard
iron piping exchangers.
The coil is placed to the rear compared with the air outlet; on the
front there is an auxiliary drip tray that guarantees total collec-
tion of condensate.
16
AREO I
Fans
with statically balanced sickle blades housed in a specially de-
signed compartment that enhances ventilation and reduces
noise emissions.
Electric motor
Permanent magnet with built-in inverter, all motors are
equipped with thermic protection and protection rating IP44
(supplier 1) and IP54 (supplier 2)
Accident grill
made of electrogalvanised steel wire, it supports the motor and
is fixed to the cabinet by means of vibration-damping supports.
3.3
ACCESSORIES
Electronic microprocessor control panels with display
DIST
MY COMFORT controller spacer for wall mounting
EVO-2-TOUCH 2.8" touch screen user interface for EVO control
EVOBOARD
Circuit board for EVO control
EVODISP
User interface with display for EVO controller
MCLE
Microprocessor control with display MY COMFORT LARGE
MCSWE
Water sensor for MYCOMFORT and EVO controllers
Power interface and regulating louver controllers
Recess mounted controller for opening and closing the SM motor-driven regulating
CSD
louver
Accessories
VA
Auxiliary tray for collecting condensate
Fixation templates
DFC
Template for column installation
DFO
Adjustable template for wall/column installation
DFP
Template for wall installation
Protective grill for gyms (ball shield)
R
Protective net for gyms
Diffusors
DO
Two-row adjustable fin diffuser
External air intake
PAE
External air intake
PAEM
Manual mixing louver
PAEMM
Motor driven mixer louver, 24 V power supply with spring return
External air intake rain protection grille
GR
Air intake grille with subframe