Part Names and Functions
1 Power/Busy Indicator
Operation status is indicated as follows:
During Power ON: Lights dimly
During reading/writing: Lights
During disc cover open/close: Lights dimly
2 OPEN Button
Press to open the disc cover.
• When this device is connected to a Mac with a disc
inserted, this function cannot be used due to macOS
specifications. Please check the macOS User Guide
for how to operate with a Mac.
PureRead mode display function
Press and hold the [OPEN] button to see the set PureRead mode. Refer to page 22 for details.
3 Disc Cover
Press the [OPEN] button to open the disc cover then place only a BD, DVD or CD disc onto the
tray with the label facing up. Close the disc cover gently.
Do not manually force open the disc cover.
Use the Forced Open Lever (see below) to open the disc cover during POWER OFF.
WARNING
Take care not to let your hand or fingers become pinched by the cover.
4 USB 3.2 Gen1 & USB 2.0 Type-C Connector
5 DC IN (AC Adapter Connector)
6 Forced Open Lever
Use to open the disc cover when the drive is not
powered. If the disc cover fails to open when the
[OPEN] button is pressed, turn the power to the drive
OFF and wait approximately one minute until the disc
stops spinning before trying to open the disc cover.
During normal operation, the [OPEN] button should be
used to open the disc cover.
WARNING
To prevent injury and damage to the unit, do NOT force the disc cover to open while the disc is spinning.
3
2
1
5
4
6
BDR-XD08EMB-S
Nederla
13