Pioneer BDR-XD08EMB-S Manual Del Propietário página 16

Connection
This unit can be added without shutting down or rebooting the computer. Connect the unit to the
supplied USB cable.
1 Confirm that your computer (PC) has an available USB port.
2 With your Windows
connect this unit to the PC.
Caution
• Do not disconnect the USB cable during data transfers.
• Do not disconnect the USB cable during PC startup or any operation with the unit.
Computer
(PC)
rlands rlands
Note
• Connection to a USB 3.0 port is recommended, since when a USB 3.0 cable is connected to a USB
2.0 port, the connection will be limited to USB 2.0 performance standards.
• This unit can operate with USB 1.1 but will not provide optimum performance.
• Connecting this unit through a USB hub or using unspecified cables may not achieve proper
operation.
Removal procedure
Check that the status shows that the main unit is not being accessed (the indicator LED is not lit
brightly), then remove the USB cable.
CAUTION
This product satisfies EMC regulations when shielded cables and connectors are used to connect
the unit to other equipment. To prevent electromagnetic interference with electric appliances such
as radios and televisions, use shielded cables and connectors for connections.
16
BDR-XD08EMB-S
®
or Mac operating system running, use the supplied USB cable to
This unit
USB 3.0 port
recommended
USB 3.0
USB cable (supplied)
DC IN
5V
USB Type-C
exchange
cable
(supplied)
DC IN
5V
USB cable
(supplied)