Pioneer BDR-XD08EMB-S Manual Del Propietário página 9

WARNING
• Unplug the USB cable from this device during lightning storms or when unused for long periods of
time.
• During operation, do not subject the device to vibration or shock, or plug in or unplug the USB
cable.
• During operation, do not move or pick up the device. The disc rotates at high speed, and picking up
or moving the device may damage the disc. To move the device, first remove the disc, and turn the
power off.
• Do not remove the device cover, or modify the device. The interior of the device contains high-
voltage parts, and doing so may lead to fire or electric shock. Ask your dealer to carry out any
internal inspections, maintenance, and repairs. This device is a precision instrument, so refer
this product to an authorized dealer or service center if disassembly is required.
• Do not place any objects on this device, which may damage it or cause it to become unstable and
fall over or fall off, potentially leading to injury.
• Do not use discs that are cracked, deformed, or have been repaired with glue or other adhesives.
Discs rotate at high speed within the device, and in these cases may fly out and lead to injury or
damage.
• DO NOT LOOK INTO THE INTERIOR OF THE DEVICE FROM GAPS IN THE TOP COVER.
LIGHT FROM LASERS MAY CAUSE VISUAL IMPAIRMENT TO EYES.
• Avoid operating or locating this drive near water or other sources of fluid.
• Do not place this product on an unstable cart, stand, or table. The product may fall and become
seriously damaged.
• When using this device, ensure that you adhere to the displayed warnings and cautions from your
PC manufacturer.
WARNING
Ensure you abide by the following precautions, as failure to do so may lead to fire or electric
shock.
• Connect cables to the device only after checking that the cables have not deteriorated and are not
damaged. Do not use any cables that have deteriorated or are damaged.
• Do not disassemble or modify the device. Do not allow metal, flammable objects, chemicals, water
or other foreign matter to enter the device.
• Ensure that water does not enter the device, and that it is kept dry.
• Ensure it is used with the specified power supply voltage.
IMPORTANT SAFETY INSTRUCTIONS
BDR-XD08EMB-S
Nederla
9