Shindaiwa T226S Manual De Instrucciones página 24

Maintenance and care
Observe the following precautions when checking and maintaining your product after use:
 Turn the engine off and do not attempt to check or maintain the product until the engine has cooled.
You could burn yourself.
 Remove the spark plug cap before performing checks and maintenance.
An accident could occur if the product starts unexpectedly.
 Checking and maintenance requires specialist knowledge. If you are unable to check and maintain the product or deal with a
fault yourself, consult your dealer. Do not attempt to dismantle the product.
 For spare parts and consumables, please use only genuine parts and designated products and components. Using parts from
other manufacturers or non-designated components may result in a malfunction.
Servicing guidelines
Area
Air filter
Fuel filter
Spark plug
Carburettor
Cooling system
Silencer
Silencer
Angle transmission
Starter
Cut off knife
Fuel system
Screws, bolts and nuts
* Or 50 hours, whichever occurs first. ** Or 100 hours, whichever occurs first.
 Time intervals are maximum. Actual use and your experience will determine the frequency of required maintenance.
Maintenance and care
If you have any questions or problems, please contact your dealer.
IMPORTANT
Maintenance
Clean/Replace
Inspect/Clean/Replace
Inspect/Clean/Adjust/Replace
Adjust/Replace and adjust
Inspect/Clean
Inspect/Tighten
Clean
Grease
Inspect
Inspect/Clean
Inspect
Inspect, Tighten/Replace
IMPORTANT
Maintenance and care
WARNING
Page
23
23
25
23
24
24
24
25
-
-
24
-
22
Before use
•
•
•
•
•
•
•
•
Monthly
•
•
•**
•*