Olimpia splendid Bi2 WALL AR 1000 Manual De Instalación Y Mantenimiento página 46

9 - INCONVENIENCES AND POSSIBLE REMEDIES
Consult the following points before requesting assistance or repairs.
MALFUNCTIONING
The appliance does not start
The air circulates regularly, but
cooling is insufficient
Cooling not very effective
Heating not very effective
Impossible to modify the fan speed
The TEMP indicator does not
switch on
Do not try to repair the appliance by yourself.
If the problem has not been solved, please contact your local retailer or the closest assistance service.
Supply detailed information about the malfunction and the equipment version.
EN - 18
CAUSE
Electric current failure
Switch is off
Switch fuse probably blown
Remote control batteries
charged or remote control broken
Temperature not set correctly
Accumulation of dirt in the appli-
ance heat exchanger coil
Air filter dirty
Obstruction of the appliance inlet
Doors and windows open
Exposure to direct sunlight
Too many heat sources
Outdoor temperature too high
Outdoor temperature lower than
7°C
Doors and windows partially open Close doors and windows
Control that the MODE indicated
on the display is AUTO (automatic)
Protection against hot air in cool-
ing mode
Protection against cold air in heat-
ing mode
Control that the MODE indicated
on the display is FAN (ventilation)
WHAT MUST BE DONE?
Wait for the electric current to reset
Switch the unit on
Replace the fuse
dis- Replace the batteries or examine
the remote control
Set the correct temperature
Clean the heat exchange coil
Clean the filter
Eliminate the impurities to free the
air flow
Close doors and windows
Protect from solar rays via curtains
Reduce the heat sources
The conditioner cooling capacity
lowers (normal)
Use a heating device
If automatic mode is selected, the
conditioner automatically adjusts
the fan speed
Lower the inlet temperature in
cooling mode; increase the inlet
temperature in heating mode
In ventilation mode, the tempera-
ture cannot be set