Descargar Imprimir esta página

Testboy TV 510 Manual De Instrucciones página 14

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 21
Operation
Precision mode
This mode can be activated using the
of the display:
. In this mode, the display is switched off completely for the brief moment of the measure-
ment in order to draw less current from the PV-module before and during the measurement
and thus further improve the measurement result and deliver more accurate results.
Display brightness
The display brightness can be adjusted using the
button is pressed.
Unlocking the plug
After the measurement, the PV-module plugs are disconnected from the device using the appropriate unlocking tool.
Switching off the device
To switch off the device, press the
Cleaning
If the appliance has become dirty through daily use, it can be cleaned with a damp cloth and a mild household cleaner. Never use
harsh cleaning agents or solvents for cleaning.
To avoid electric shocks, do not allow moisture to penetrate the housing.
Maintenance
The appliance does not require any special maintenance when operated in accordance with the operating instructions, with the
exception of the batteries.
Battery change
If the batteries have discharged, you will see this on the battery indicator in the display and the device may switch off. Please re-
place the batteries immediately to ensure the accuracy of the test values.
Disconnect the MC4 plug connections before opening the battery compartment!
To change the batteries, open the battery compartment. To do this, loosen the screw using a suitable screwdriver. Ensure that the
polarity is correct when inserting the new batteries. Carefully close and screw back the battery compartment.
Batteries do not belong in household waste. There is also a collection point near you!
Technical data
Display
Power supply
Connection
Tension
Electricity
Umax
Imax
Pmax
14
- button and the following appears in the bottom right-hand corner
- button. One of the 3 brightness levels can be set every second time the
- button for longer than 1 second.
OLED screen
PV-module (MC4 connector) / 3x 1,5V AAA
MC4
12 - 60 V DC
0 - 30 A DC
60 V DC
30 A DC
800 W
®
Testboy
TV 510

Publicidad

loading