Publicidad
Idiomas disponibles
Idiomas disponibles
Replacing the brush
We recommend replacing the brush af-
ter 6 to 12 months.
1. Remove the brush.
a Press the clamps together.
b Remove the brush cover.
c Remove the brush.
d Remove the brush bearing.
2. Install the new brush.
a Fit the brush bearing.
b Fit the brush.
c Fit the brush cover and press it
down until it audibly latches into
place.
Malfunctions often have simple causes
that you can remedy yourself using the
following overview. When in doubt, or
in the case of malfunctions not men-
tioned here, please contact your autho-
rized Customer Service.
22
We recommend replacing the side
brush after 3 to 6 months.
Note
To avoid damage, do not place the ro-
bot on the laser sensor (LiDAR).
1. Turn the cleaning robot over.
2. Remove the side brush with a Phil-
3. Tighten new side brush with a Phil-
The battery has reached the end of its
service life if the cleaning robot con-
stantly travels to the station for
charging after a short cleaning opera-
tion.
1. Switch off the cleaning robot, see
2. Send the cleaning robot to Custom-
Troubleshooting guide
English
Replacing the side brush
lips screwdriver.
lips screwdriver.
Replacing the battery
chapter Switching off the cleaning
robot.
er Service. Observe the regulations
for shipping lithium-ion batteries,
see chapter Transport.
Publicidad
