Publicidad
Idiomas disponibles
Idiomas disponibles
Storage
ATTENTION
Damage to the cleaning robot due to
incorrect storage
Do not store the cleaning robot upside
down. The housing of the laser radar
(LiDAR) should never come into con-
tact with the ground or objects.
Do not place any objects on the clean-
ing robot.
Store the cleaning robot fully charged
and switched off in a cool and dry
place.
Note
To avoid deep discharge of the battery,
fully recharge the cleaning robot after 5
months at the latest.
1. Clean the cleaning robot, see chap-
ter Cleaning.
2. Fully charge the cleaning robot, see
chapter Manually send the cleaning
robot for recharging.
3. Unplug the charger from the power
outlet and the station.
4. Switch off the cleaning robot, see
chapter Switching off the cleaning
robot.
5. Store the cleaning robot in a cool
and dry place.
Care and service
Cleaning
Cleaning the 2-in-1 dust container
1. Press any key.
The cleaning robot stops.
2. Remove the 2-in-1 dust container.
20
a Open the cover at the top.
b Press the clamp.
c Remove the 2-in-1 dust container.
3. Clean the 2-in-1 dust container with
water reservoir.
a Open the filter flap.
b Remove the filter flap.
c Empty the 2-in-1 dust container
with water reservoir.
d Clean the 2-in-1 dust container
with water reservoir.
e Insert the filter flap.
f Close the filter flap.
4. Install the 2-in-1 dust container.
English
Publicidad
