Publicidad
Idiomas disponibles
Idiomas disponibles
Error
Battery does not
charge
The cleaning ro-
bot is not return-
ing to the
charging station
The cleaning ro-
bot makes un-
usual sounds
The cleaning ro-
bot does not re-
sume cleaning
Cause
Charging contacts dirty.
Ambient temperature is be-
low 32 °F (0 °C) or above
95 °F (35 °C).
Battery is discharged.
The cleaning robot is too far
away from the charging sta-
tion.
Not enough space around
the charging station.
There are too many obsta-
cles around the charging
station.
The cleaning robot remaps
its environment when it has
been moved over a longer
distance.
The cleaning robot was not
started from the charging
station. In this case, it only
returns to the place from
which it was started.
A foreign object could be
caught in the brush, the side
brush or in a wheel.
The cleaning robot is in "Do
not disturb" mode.
The cleaning robot is
charged manually or has
been placed in the charging
station.
Rectification
1. Wipe the charging contacts
on both the charging station
and the cleaning robot with a
dry cloth.
1. Use the cleaning robot at tem-
peratures above 32 °F (0 °C)
and below 95 °F (35 °C).
1. Manually place the cleaning
robot on the charging station
and let it charge completely.
1. Move the cleaning robot clos-
er to the charging station.
2. Manually place the cleaning
robot on the charging station.
1. Ensure that there is sufficient
space around the charging
station, see chapter Setting
up the charging station.
1. Place the charging station in a
more open area, see chapter .
1. Manually place the cleaning
robot on the charging station.
1. Manually place the cleaning
robot on the charging station.
1. Switch off the cleaning robot.
2. Remove the foreign object.
1. Ensure that the cleaning robot
is not in "Do not disturb"
mode.
1. Wait until the cleaning robot is
fully charged.
English
25
Publicidad
