MAINTENANCE
mm
cleaning the head andtape path +
After every 10 hours of use, clean the head and the
tape path with a head cleaning cassette or cotton
swab moistened with cleaning fluid or denatured
alcohol. (These cleaning
kits are commercially
available.)
When cleaning with a cotton swab@,
wipe@,
@
and @.
To clean the cabinet
Use asoftcloth lightlymoistened with a mild detergent
solution.
Do not use strong solvents such as alcohol, benzine
or thinner.
If an erroneousdisplayor operationoccurs.+
Replace the batteries with new ones and reset the
unit touching the inside of the RESET hole with the
headphone plug or similar tool.
When the unit is reset, the preset station and the
exercise program are erased. Set them again.