Forest-Master FMX4 Manual Del Usuario página 31

3. Remove the 4 bolts and nuts securing the front foot and
the internal joiner to the front leg mount. Keep the front foot
as this is fitted to the trolley front legs.
8
10
9
FMX4 (Models D & TW)
8
3
7
10
9
7
4. Attach the wheels (10) to the
axle bars(3).
Place a washer (7) onto the axle.
Place the wheel (10) over the
axle then secure in place with a
split pin (8). Ensure the ends of
the split pin are opened up and
bent back around the axle after
inserting.
Place a dome (9) cap over the
end of the axle and tap into
place with a rubber or wooden
mallet.
31