Forest-Master FMX4 Manual Del Usuario página 33

FMX4 (Models D & TW)
8. Attach the front legs (2) to the front leg
mount using 2 M8 x 35 bolts (5). The bolts
go through the lower of the two bolt holes
in the top of the leg.
9. Slide the remaining two leg clamps onto
the legs and tighten the M8 bolts to secure.
As with the rear legs, the legs go through
the tubes with only one nut welded to them.
10. Attach the remaining axle bar and wheel
assembly to the front legs using 2 M8 x 35
bolts (5) and 2 M8 nuts (6).
33