Publicidad
Idiomas disponibles
Idiomas disponibles
6. Temporarily install the Carrier ①
to appropriate position by using
the STD bolts ⓔ removed in st-
ep 3 and then be sure to tighten
them.
STD bolt ⓔ: 26.0N·m
( 2.7 kgf-m, 19.2 lbf-ft )
7. Reinstall the removed motorcycle
parts in the reverse order of rem-
oval.
8. Remove the handle bar bal-
ancer from RH and LH handle
bar end.
9. Install the Balancer ⑧ by us-
ing the Screw ⑨ to RH and
LH handle bar end.
Exceeding maximum loading capacity can cause loss of control.
Never exceed the maximum loading capacity described in the
Installation Instruction.
The maximum loading capacity : 6 kg (13.3 lbs)
ⓔ
WARNING
GENUINE SUZUKI ACCESSORIES
①
ⓔ
⑧
⑨
5 /5
Publicidad
