Maytag MGC5430 Guia Del Usuario página 7

&
. I£1
BURNER CAPS AND SEALED
GAS BURNERS
RemovableBurner Caps
II Allowburnerto cool.Removeburnercap
and wash in soapy water with a plastic
scouring pad. For stubborn soils, clean
with a soap-filled, nonabrasivepad or
Cooktop Cleaning Creme (Part
#20000001)** a nd a sponge.
II Do not cleanin dishwasheror self-clean-
ing oven.
SealedGas Burner
| Clean frequently.Allow burner to cool.
Cleanwithsoapand plasticscouringpad.
Forstubborn soils,cleanwitha soap-filled,
nonabrasive pad.
II Be carefulnotto getwater intothecenter
of the burner.
| Use carewhencleaningthe ignitor.If the
ignitor is wet or damaged the surface
burnerwill notlight.
| Toensureevencookingperformance, keep
burnerportsfree of foodsoils/debris.
BURNER GRATES- PORCELAIN
ON CAST iRON
Washgrateswith warm,soapywaterand
a nonabrasive, plasticscrubbingpad.For
stubbornsoils, clean with a soap-filled,
nonabrasive pad or Cooktop Cleaning
Creme(Part#20000001)** a nd a sponge.
Ifsoil remains,reapplyCooktopCleaning
Creme,cover with a damp paper towel
and soak for 30 minutes.Scrub again,
rinseanddry.
Do notcleanin dishwasheror self-clean-
ing oven.
CONTROL KNOBS
| Removeknobs in the OFF position by
pullingup.
II Wash,rinseand dry.Do notuseabrasive
cleaningagentsasthey may scratchthe
finish.
| Turnon eachburnerto be suretheknobs
havebeencorrectlyreplaced.
COOKTOP- PORCELAIN
ENAMEL
Porcelainenamelisglassfusedon metaland
may crack or chip with misuse. It is acid
resistant,not acidproof.All spillovers, e spe-
cially acidic or sugary spillovers,should be
wipedup immediately with a dry cloth.
II When cool,wash with soapy water,rinse
and dry.
| Never wipeoff a warmor hotsurfacewitha
damp cloth. This may cause crackingor
chipping.
I Never useovencleaners, a brasive or caus-
tic cleaning agents on exterior finish of
range.
COOKTOP - STAINLESS STEEL
(SELECT MODELS)
| DO NOT USE ANY CLEANINGPROD-
UCTCONTAINING CHLORINE BLEACH.
| AL WAYSWIPEWITHTHEGRAINWHEN
CLEANING.
I DailyCleaning/Light Soil -- Wipe with
one of the following- soapy water, white
vinegar/water s olution,Formula 409 Glass
and Surface Cleaner* or a similar glass
cleaner-usinga spongeor softcloth.Rinse
and dry.To polishandhelp preventfinger-
prints, follow with StainlessSteel Magic
Spray(PartNo. 20000008)**.
I Moderate/Heavy S oil -- Wipewithone d
thefollowing- BonAmi*,SmartCleanser*,
or SoftScrub*-usingadampspongeor soft
* Brand namesare registeredtrademarksof the respectivemanufacturers.
** To order call 1-800-688-8408.
cloth.Rinseanddry.Stubbornsoilsmaybe
removedwith a damp Scotch-Brite*pad;
rubevenlywiththegrain.Rinseanddry.To
restore luster and remove streaks,follow
with StainlessSteel MagicSpray.
Discoloration -- Usinga dampspongeor
softcloth,wipewithCameoStainlessSteel
Cleaner*.Rinse immediatelyand dry. To
remove streaks and restore luster,follow
with StainlessSteel MagicSpray.
SURFACEBURNERFAILSTO LIGHT.
| Checkto be sureplug is securelyinserted
into receptacle.
| Checkor re-setcircuit breaker. Checkor
replacefuse.
| Checkpowersupply.
| Checkto be sure burner is correctlyrated
for your kindof gas.
| Checkto be sure burner ports or ignition
ports are not clogged.
| Checkto be sureignitorisdry andclicking.
Burner will not light if ignitor is damaged,
soiled or wet. If ignitor doesn't click, turn
controlknob OFF.
| Check to be sure burnercap is correctly
seatedon the burner base.
SURFACEBURNERFLAME LIFTS
OFF PORTS.
| Check to be sure a pan is sitting on the
grateabove.
| Contactan authorizedMaytagservicer.
THE FLAME IS UNEVEN.
II Burnerports may be clogged.
| Flame may need to be adjusted.Contact
an authorizedMaytagservicer.
SURFACE BURNER FLAME IS
YELLOW IN COLOR.
| Contactan authorizedMaytagservicer.
| Someyellowtips on the flameare accept-
able when usingLP gas.