Assembling The Vacuum Attachment - Stihl BGE 61 Manual De Instrucciones

Assembling the Vacuum
Attachment
BGE 71 only
Your vacuum shredder can be switched
on only when the elbow and suction tube
are properly mounted. The union nuts
activate a switch which closes the circuit
to allow the motor to be switched on.
Disconnect the plug from the power
N
supply.
Mounting the Elbow
WARNING
Make sure the zipper on the catcher bag
is closed.
3
1
Push the elbow (1) into the catcher
N
bag (2) as far as the mark (smaller
arrow).
Tighten strap (3) on catcher bag
N
and press down the buckle tab (4).
BGE 61, BGE 71
Line up the recesses.
N
Push the elbow (5) into the blower
N
housing stub (6) as far as stop.
Push the union nut (7) over the
N
blower housing stub (6) and turn it in
the direction of the arrow as far as
the stop. You will hear the safety
switch being activated.
Assembling the Suction Tube
2
4
Line up the arrows on the suction
N
tube and extension tube. Push
together and lock in position.
7
5
6
Mounting the Suction Tube
2
Shut off the engine.
N
Press down the lock button (1) by
N
inserting a suitable tool through the
opening.
Push lug (arrow) against blower
N
housing and hold it there.
Rotate the intake screen (2) in the
N
direction of arrow as far as the stop
and lift it away.
Line up the arrows (3).
N
Push the suction tube into the intake
N
opening as far as the stop.
English
1
11