Assembling The Vacuum Attachment - Stihl BGE 61 Manual De Instrucciones

Assembling the Vacuum
Attachment
BGE 71 only
Your vacuum shredder can be switched
on only when the elbow and suction tube
are properly mounted. The union nuts
activate a switch which closes the circuit
to allow the motor to be switched on.
N Disconnect the plug from the power
supply.
Mounting the Elbow
3
1
N Push the elbow (1) into the catcher
bag (2) as far as the mark (smaller
arrow).
N Tighten strap (3) on catcher bag
and press down the tab (4).
Make sure the zipper on the
catcher bag is closed.
BGE 61, BGE 71
N Line up the recesses.
N Push the elbow (5) into the fan
housing stub (6) as far as stop.
N Push the union nut (7) over the fan
housing stub (6) and turn it in the
direction of the arrow as far as the
stop. You will hear the safety switch
being activated.
Assembling the Suction Tube
2
4
N Line up the arrows on the suction
tube and extension tube. Push
together and lock in position.
Mounting the Suction Tube
7
6
N
N
N
N
1
Shut off the engine.
Press tab (1) towards fan housing,
rotate intake screen (2) in direction
of arrow as far as the stop, and lift it
away.
Line up the arrows (3).
Push the suction tube into the intake
opening as far as the stop.
English
11