Kemper MaxiFil Clean Instrucciones De Servicio página 63

WARNING
Danger from toppling over during transport!
The product may tilt and topple over when moved. People can be injured
due to the high dead weight.
• Before moving, release the brakes on the castors.
• Move and set down the product only on flat, smooth floor coverings.
• Only move the product with the push handle.
• Do not use the push handle to lift the product.
• Do not sit or climb on the product.
• Before moving; if present, fold in suction arm / wind up or dismantle
suction hoses
WARNING
Health hazards caused by welding fume particles
Do not inhale welding dust / smoke! Serious injury to the lungs and
respiratory tract is possible!
Sweat smoke contains substances that can cause cancer!
Skin contact with cutting and welding fumes etc. can cause skin irritation
in sensitive persons!
Repair and maintenance work on the product may only be carried out by
trained and authorised personnel while complying with the safety rules
and the applicable accident prevention regulations.
To avoid contact with and inhalation of the dust particles, wear
disposable overalls, protective goggles, gloves and a suitable Class FFP2
respiratory protection filter mask in accordance with EN 149.
The release of hazardous dust particles during repair and maintenance is
to be avoided to ensure that persons not charged with the task are not
affected.
WARNING
Work on the compressed air vessel and on the compressed air lines and
components may only be performed by persons with expertise in
pneumatics.
The pneumatic system must be isolated and depressurised prior to the
performance of maintenance and repair work on the external
compressed air supply.
1502030-00 - 63 -
EN