Kemper MaxiFil Clean Instrucciones De Servicio página 92

Care/maintenance of the product is essentially limited to draining the
condensate from the compressed air vessel, checking set values, visually
checking for damage and leaks and cleaning the external surfaces.
WARNING
Skin contact with dust particles, etc. may cause skin irritation in sensitive
persons.
Serious injury to the lungs and respiratory tract is possible!
To avoid contact with and inhalation of dust particles, wear disposable
gloves and disposable respiratory protection, Class FFP2 or higher.
When cleaning, the release of dangerous dust particles must be avoided,
so that bystanders are not injured.
NOTE
Do not clean the product with compressed air. This may result in dust
particles getting into the ambient air.
Always ensure there is adequate lighting and ventilation for maintenance
tasks.
7.3.1 Checking/changing the dust collection container
According to the use, but at least once a month, the fill level of the dust
collection container must be checked and drained if necessary (approx. 2/3
filled).
The time until the dust collection container must be drained depends on
the type and quantity of the dust particles that occur. The operator must
check the level by hand at regular intervals to avoid the dust collection
container becoming overfull.
The dust collection container must always be drained in good time to avoid
contamination of the surroundings.
The product must be switched off when draining or when checking the fill
level.
1502030-00 - 92 -
EN