Kemper MaxiFil Clean Instrucciones De Servicio página 94

Fig. 31: Maintenance – Draining the dust collection container
Item Description
3 Dust collection container
4 Cover with hold-down device
Tab. 33: Maintenance – Draining the dust collection container
5. Carefully remove the cover with the hold-down device (Pos. 4) from the
dust collection container without stirring up any dust as shown in the
illustration.
6. Seal the disposal bag with the dust particles airtight and dispose of it
according to regulations.
7. Insert a new disposal bag in the dust collection container.
8. Place the cover with the hold-down device on the dust collection
container.
9. Push the dust collection container (Pos. 3) into the product and close
the maintenance cover (Pos. 1) again using the square socket wrench
(Pos 3).
10. Put the product back into operation. See chapter "Commissioning"
7.3.2 Checking/changing the pre-filter cassette
Depending on usage, but at least once a month, the pre-filter cassette
must be checked and replaced if it is heavily soiled.
1502030-00
Item Description
5 Disposal bag
- 94 -
EN