Kemper MaxiFil Clean Instrucciones De Servicio página 89

Fig. 27: Changing filters – Access to the filter cartridge
Ite Description
m
1 Cover plate
Tab. 29: Changing filters – Access to the filter cartridge
1. Provide a new filter cartridge.
2. Switch off the product at the rotary switch
3. Disconnect the product from the power supply by unplugging.
4. Open the cover plate (Pos. 1) as shown in the illustration. To do this,
remove the 6 screws using a suitable tool.
1502030-00
Ite Description
m
2 Filter cover
- 89 -
EN