Abus TVAC18000C Manual De Instrucciones página 25

You can make the settings for the motion sensitivity here. The
motion sensitivity can be controlled via the PIR sensor as well as
the PIR sensor and the software motion detection at the same
time.
Motion
sensitivity
Select a camera (1–4), now change to the live view with the grid
for the motion mask.
Double-click on it to deactivate a partition.
Motion area
Just click on a partition to activate it.
Right-click the mouse to exit the live view and the settings are
saved.
You can make settings for the alarm here:
Response for
recording
PIR motion detection:
Motion is detected only by the camera's
PIR sensor.
PIR detection range: up to 5 m
PIR and "Low" motion detection:
Motion is detected using the PIR and the
motion detection software.
PIR detection range: up to 5 m
Software detection range: up to 4 m
PIR and "Medium" motion detection:
Motion is detected using the PIR and the
motion detection software.
PIR detection range: up to 5 m
Software detection range: up to 5 m
PIR and "High" motion detection:
Motion is detected using the PIR and the
motion detection software.
PIR detection range: up to 5 m
Software detection range: up to 6 m
Motion detection recording duration:
Configure the recording duration for the
motion detection.
Selection: 30 / 60 / 120 seconds
For repeated motion, the recorded duration
can be increased.
Alarm sounds for motion:
Configure the duration of the alarm for
motion
Selection: Off / 5 / 10 seconds
Alarm sounds for loss of video:
Configure the duration of the alarm for loss
of video
Selection: Off / 5 / 10 seconds
The alarm sounds through the loudspeaker
of the monitor/ TV via HDMI.
25
English