Publicidad
Idiomas disponibles
Idiomas disponibles
EN Buttons and functions
• Function buttons
Button
HOLD
RANGE
MAX.
NCV
FUNC.
Rotary switch: select between functions.
• Test probe: for V/Ω/
• COM jack: common test lead input.
• LCD display: shows results of measurements.
• LED indicator: In Logic mode, green indicated low level, red indicated
high level.
• With the rotary switch in any position except OFF, the red light on the
left indicated AC Voltage values is greater than 110 V.
• Protection ring: Keep hands behind the protection ring and away from
the probe to avoid injury.
87_5059340213873_BODNER_A6_IM_MULTI_V03.indd 18
87_5059340213873_BODNER_A6_IM_MULTI_V03.indd 18
EN Use
Function
Description
Any mode
Press to hold the current reading on the
display. Hold the button while turning on the
meter to turn off the auto power off feature.
V Ω mA
Switch ranges in manual-range. Hold to return
to auto-range.
Any mode
Press to hold the maximum measured value on
the display.
Any mode
Hold for Non-contact voltage detection.
V Logic
Switch between AC and DC voltage. Hold
Ω
down for Logic level test. Switch between
mA
resistance, diode and continuity modes Switch
between AC and DC current.
/
measurements.
18
8/7/2021 2:46
8/7/2021 2:46
Publicidad
