Kingfisher bodner 5059340213873 Manual Del Usuario página 27

Diode test
• Insert the black test lead into the
COM jack.
• Turn the rotary switch to the
position.
• The default mode isresistance.
Press "FUNC" to switch to diode
test.
• Connect the test probe to the
anode (+) and test lead to the
cathode (-) of the diode.
• The display will show the
measured value.
NOTE:
• The display shows the approx,
forward voltage drop.
• If the connections are reversed
or the leads are not connected,
the display will show "OL".
87_5059340213873_BODNER_A6_IM_MULTI_V03.indd 26 87_5059340213873_BODNER_A6_IM_MULTI_V03.indd 26
EN Use
Continuity
WARNING! Risk of electric shock,
be sure all power to circuit is
off and capacitors have fully
discharged before measurelng
continuity.
• Insert the black test lead into the
COM jack.
• Turn the rotary switch to the
position.
• The default mode is resistance.
Press "FUNC" twice to switch to
continuity.
• Connect the test probe and
test lead across the circuit for
measurement.
• If the measured resistance is less
than 50 Ω, the buzzer will sound.
NOTE:
• If the leads are not connected
or the resistance is higher than
200 Ω, the display will show "OL".
26
8/7/2021 2:46 8/7/2021 2:46