Operation And Maintenance - Metabo HPT C 10FCH2 Manual De Instrucciones

DOUBLE INSULATION FOR SAFER OPERATION
To ensure safer operation of this power tool, metabo HPT has adopted a double insulation design. "Double insulation" means that two physically separated
insulation systems have been used to insulate the electrically conductive materials connected to the power supply from the outer frame handled by the
operator. Therefore, either the symbol "
Although this system has no external grounding, you must still follow the normal electrical safety precautions given in this Instruction Manual, including not
using the power tool in wet environments.
To keep the double insulation system eff ective, follow these precautions:
∗ Only metabo HPT AUTHORIZED SERVICE CENTER should disassemble or assemble this power tool, and only genuine metabo HPT replacement parts
should be installed.
∗ Clean the exterior of the power tool only with a soft cloth moistened with soapy water and dry thoroughly.
∗ Never use solvents, gasoline or thinners on plastic components; otherwise the plastic may dissolve.
NOTE:
The information contained in this Instruction Manual is designed to assist you in the safe operation and maintenance of the power tool.
Some illustrations in this Instruction Manual may show details or attachments that diff er from those on your own power tool.
NAME OF PARTS
MODEL C10FCH2 C10FCH2(S) / MODEL C10FCE2
•
Laser marker
(Only C10FCH2
" or the words and "Double insulation" appear on the power tool or on the nameplate.
SAVE THESE INSTRUCTIONS
MAKE THEM AVAILABLE TO OTHER USERS
OWNERS OF THIS TOOL!

OPERATION AND MAINTENANCE

Gear case
Dust bag
C10FCH2(S))
•
Vise assembly
Sub fence (B)
Fence (B)
AND
AND
Motor head
Handle
Lock-off button
Motor
Saw blade
Lower guard
Rotation
direction
Indicator (B)
(For bevel scale)
Fence (A)
Table insert
Indicator (A)
(For miter scale)
Lever
Side handle
Turn table
Fig. 1
English
5