Descargar Imprimir esta página

cecotec SPRINT Manual De Instrucciones página 87

Bicicleta eléctrica

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 66
ENGLISH
Button operation
On/Off
Press the
button to switch on the console. Press and hold again to switch it off. When the
bicycle is at standstill and the console is inactive for 10 minutes, the console will automatically
turn off and switch off the bicycle.
Screen I. Fig. 8
Press the
button to switch on the console and go to screen I.
Switching the headlight on and off. Fig. 9
Long press the
button to switch the headlight on or off.
Gear adjustment. Fig. 10
Briefly press the
and
button to select the gears (1-5). First gear is the shortest, while fifth
gear is the longest. Number 0 indicates that there is no gear.
Pedestrian mode (or stationary start mode) 6 km/h. Fig. 11
Press and hold the
button. The icon displayed in the gear display area indicates that the
vehicle is not travelling faster than 6 km/h. If you stop pressing this button, the function will be
cancelled.
Cruising speed. Fig. 12
When going faster than 7 km/h, press and hold the
button to activate the cruising speed.
The
icon will be displayed. If you brake or press and hold the
button again, the function
will be deactivated.
Screen II. Fig. 13
In screen I, press the
button shortly to see screen II.
Screen III. Fig. 14
In screen II, press the
button shortly to see screen III.
Screen IV. Fig. 15
In screen III, press the
button shortly to see screen IV.
Screen V. Fig. 16
In screen IV, press the
button shortly to see screen V. If the electronic control system fails,
the console will automatically jump to this screen and display the corresponding error code.
The table below shows all error codes:
87
SPRINT | SPRINT SILVER

Publicidad

loading

Este manual también es adecuado para:

Sprint silver0721707252