cecotec SPRINT Manual De Instrucciones página 92

ENGLISH
TIGHTENING TORQUE TABLE
Front wheel nuts
Rear wheel nuts
Brake retaining nut
Handlebar nut
Steering nut
Front fork nut
Maintenance control
MONTHLY
Regular Main frame
cleaning
Transmission
Bike chain
Wheels
Wheels
Bolts
92
SPRINT | SPRINT SILVER
30 - 35 Nm
30 - 35 Nm
8 - 10 Nm
10 Nm
M4: 5 - 7 Nm
M5: 7 - 10 Nm
M6/M7: 12 - 15 Nm
35 - 35 Nm
Use a low pressure water jet or a damp cloth to clean it and
then wipe it dry. Do not get the electrical components wet
when cleaning the electric bike.
Use a bicycle transmission degreaser on the chain, flywheel
and gears to clean them thoroughly. It is essential to remove
dirt and dust that accumulate in the transmission. Always
clean the transmission before lubricating the chain.
Use a low pressure water jet or a damp cloth to clean it and
then wipe it dry. Do not get the electrical components wet
when cleaning the electric bike.
Check for loose spokes.
Check the tyre pressure every week and maintain it within the
limits specified on the tyre.
If there is play in the bolts and screws, tighten them
immediately.