Descargar Imprimir esta página

cecotec SPRINT Manual De Instrucciones página 90

Bicicleta eléctrica

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 66
ENGLISH
Please note:
If you press and hold the
more quickly.
Exit parameter setting menu
-
When you are in the setting menu, press the
screen and save your changes.
In the setting menu, if no action is performed after 8 seconds, the console will stop
-
displaying this menu and the changes will be saved automatically.
Note:
-
Drive safely and avoid damage to the console. Take care not to use it in adverse
environmental conditions such as heavy rain, snow or strong sunshine. Be careful not to
use it under pressure to avoid damaging the battery.
-
When the temperature is below 10 °C, the display will darken as the temperature decreases
and return to normal when the temperature increases.
Recommendations for gear changes
To improve the range of the electric bike, we recommend changing the gear ratio according to
the speed. A lower gear is best for low-speed off-roading and travelling. At higher speeds it is
best to choose a higher gear. Releasing the pressure on the pedals during shifting will allow
smooth assistance and better autonomy.
5. CLEANING AND MAINTENANCE
It is recommended to use a damp cotton cloth or sponge instead of a hose or water jet.
-
-
It is recommended to clean the electric bike after each use. However, you can wash it
weekly. This will help to extend the lifespan of the electric bike.
Use soaps and care products for bicycles that do not attack plastics and seals, which can
-
be found in specialised shops. You can also use a soap solution or liquid detergent. Do not
use aggressive products or strong degreasing agents.
You can dry clean the electric bike with a cotton cloth or microfibre cloth to prevent
-
corrosion.
The battery bracket is designed to allow water to drain off more quickly and the battery
-
contacts to dry easily. For this to happen, the bracket area and the plug must be kept
clean. The battery contacts are provided with a coating that protects the surface against
corrosion and wear.
Maintenance
Keep tyre pressure between 3.4 bar and 5 bar, maintain tyre pressure to avoid punctures. If you
notice any irregularities, take the electric bicycle to a mechanic.
90
SPRINT | SPRINT SILVER
button, the settings of all parameters (except P16) can be adjusted
and
buttons simultaneously to exit the

Publicidad

loading

Este manual también es adecuado para:

Sprint silver0721707252