Kärcher WD 2-18 Manual Del Usuario página 11

Note
If the device falls over, the float can al-
so close. To make sure the device
works appropriately again, set up the
device, switch it off, wait 5 seconds and
then switch it on again.
Blower function
The blower function can be used to
clean areas that are difficult to reach or
where vacuuming is not possible, e.g.
leaves in a gravel bed.
 Insert the suction hose into the
blower port connection. The blower
function is now activated.
Interrupting operation
1. Set the power switch to "0 OFF".
The device is switched off.
2. Variant 1: Place the handle of the
suction hose in the intermediate
parking position.
Variant 2: Attach the floor nozzle in
the storage connection.
English 11