Kärcher WD 2-18 Manual Del Usuario página 9

Mounting the hose, pipes and
floor nozzle
1. Connect the suction hose.
2. Connect the suction hose to the
handle.
Note
For convenient vacuuming in confined
spaces, the handle can be removed
and the accessory attached directly to
the suction hose.
To release the handle, press the gray
areas on both sides of the handle and
pull the handle off the hose.
3. Mount the floor nozzle.
 Mount the insert in the floor noz-
zle.
 Connect the floor nozzle to the
suction pipes.
Inserting the battery pack
● Push the battery pack into the bat-
tery pack mount from above until the
battery pack latches into place.
ATTENTION
Only use battery packs from the
KÄRCHER Battery Power (+) platform
with 18 V nominal voltage.
English 9