Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION MANUAL AND INSTRUCTIONS
ISTRUZIONI PER L'USO
INSTRUCTIONS FOR USE FOR ELECTRONIC DIGITAL CALIPER 1651DGTB/IP MANUFACTURED BY:
BETA UTENSILI S.P.A.
Via A. Volta 18,
20845, Sovico (MB)
ITALY
Original documentation drawn up in ITALIAN
To avoid contact with objects under tension
IP67 water resistant. Do not immerse in corrosive or flammable liquids
Functions
1) OFF/ZERO
2) Metric/Inch conversion (mm/in)
3) REL Mode
4) HOLD
5) Display
6) Fixing screw
7) Battery cover
SPECIFICATIONS
Range
Resolution:
Max. error:
Power supply
Level of protection against dust and liquids
FUNCTIONS
- Move the cursor or press key 1 to switch on
- Press key 1 quickly to switch off or long to reset
- Press key 2 to select unit of measure, in millimeters (mm symbol) or inches (display symbol: in)
- Press key 3 to activate relative measurement mode (display symbol: INC)
- Press key 4 to freeze the value read on the display (display symbol: H)
BATTERY REPLACEMENT
Open the battery cover. Remove second protective cover. Replace the battery. Close the protective cover very carefully. Close
the battery cover.
MAINTENANCE
Maintenance and repair jobs must be carried out by trained personnel. For such job , you can contact Beta Utensili S.p.A's repair
centre.
4
0-150mm; 0-6"
0.01mm; 0.0005"
0.02mm; 0.001"
CR2032, 3V
IP67
EN
I
Publicidad
