Slight smoke and a slight smell may occur when using the appliance for the first
time: this situation is normal and does not constitute a fault or hazard unless it lasts
beyond the first few minutes of use.
The appliance must not be stored or used in excessively humid or dusty
environments, in the presence of atmospheres saturated with gas, fumes, in excessive
or low temperatures or under direct solar radiation.
The appliance must not be used in explosive atmospheres, near explosive,
combustible, detonating or flammable material (e.g. petrol pumps, gas cylinders, etc.).
Such use constitutes a serious risk to the safety of the operator and persons nearby
and may cause fires or deflagrations.
Make sure that each part of the appliance, especially the cord, is placed at a safe
distance from heat sources (e.g. electric or gas cookers), both during use and when
not in use.
During use, the appliance must be constantly supervised: do not use it in the
absence of operators or persons who can constantly check its correct operation.
During use, the appliance must be placed at a minimum distance of 10 cm from
surrounding objects on each side: this precaution prevents parts from overheating and
improves performance.
Do not introduce any material that is not food and, in any case, absolutely avoid
starting the appliance if material that is not strictly food has been introduced.
Use only the original accessories supplied. The use of non-original accessories
could constitute a danger of damage to the appliance as well as a potential health
hazard.
Do not run with no load; do not keep the appliance running after processing.
Do not introduce water
Take the utmost care not to touch any part inside the appliance during operation
or in the minutes immediately following operation: these consist in moving parts
capable of causing potentially serious physical injury.
Use only the pusher to push the food through the grinder body; inserting food
with hands or fingers exposes users to the risk of serious physical injury.
Do not introduce hard materials, even if foodstuffs, such as bones, nuts, shells.
Do not use the blade and die plates when the kibbe accessories are installed
When fitting the accessories, ensure the necessary precautions are taken and that
the appliance is not running; check that the appliance has been properly assembled
overall before using it.
Ensure a standstill period of at least 10 minutes after use of the appliance.
Before starting the appliance, whether in forward or reverse rotation, check that
the rotating parts have completely stopped.
Do not overload the grinder body and use the pusher with moderate force.
16