Accessories
Operating instructions ..................................................... 1
Rotary arm ......................................................................... 1
Camera mounting base .................................................... 1
Mounting screws for the rotary arm and camera
mounting base (with flat washers)
M5 V 22 mm .................................................................. 7
Camera cable .................................................................... 1
Tally lamp .......................................................................... 1
Tally mounting screws (M3 V 6 mm) .............................. 2
Blank panel for tally ......................................................... 1
Precautions for use
The AW-PH400 uses a manganese dioxide-lithium battery
(CR2032).
Before discarding the pan-tilt head or its printed circuit
boards, be absolutely sure to remove the battery.
Be absolutely sure to dispose of the removed battery
in accordance with the applicable domestic laws and
regulations.
Mounting screw for wire
(with flat washer, spring washer)
M4 V 8 mm .................................................................... 1
Hexagon key wrench ........................................................ 1
AC cable ............................................................................ 2
Drop-prevention wire ....................................................... 1
Do not throw out the battery along with the general
household garbage.
For the procedure to remove the battery, refer to the section
on replacing the battery in "Replacing the consumable parts"
(page 27).
Replace the lithium
battery here.
6 (E)
Indoor Pan/Tilt Head AW-PH400