Publicidad
Idiomas disponibles
Idiomas disponibles
2.3
Operation Features
• No load setup of trip current and output voltage
A safe way to set up trip current and output voltage without having the high volt-
age activated, or the use of a load resistor.
• A large 24 x 2 character LCD with adjustable backlight
Provides a clear display of all test parameters, including test, step, mode,
status, output voltage, trip current and test time.
• Quick and easy setup from the front panel
A user-friendly interface provides a quick and easy way to set all parameters.
• Electronic ramping and testing
Digitally controlled ramping and test time.
• Line and load regulation
Linear amplifier and feedback-control maintains the output voltage indepen-
dently from load variations.
• Selectable output frequency
50/60Hz operation is selectable through the "UTILITY" setup.
• Adjustable ARC detect level
ARC detect level can be programmed from 1 to 40mA in the "UTILITY" setup.
• Storage of up to 10 tests, 16 steps for each test
10 tests with 16 steps each provides the user with a choice for testing different
types of products.
• Adjustable output voltage during test
A special test mode COM (below test 1:01) allows the user the ability to manu-
ally adjust the output voltage during test.
• Flashing high voltage indicator
A flashing red LED warns that high voltage is present at the output.
• PLC remote control
The 9-pin interface provides: inputs: START, RESET
• Data lock function
Front panel can be locked or unlocked by the "UTILITY" setup to prevent unau-
thorized changes to the setup.
• Scanner Interface
A pair of scanner tests with 96 channels.
• RS-232 Interface
Interface allows computer control operations.
Hipot Electrical Safety Testers Models H111 and H216
outputs: TEST, PASS, FAIL
9
Publicidad
