Publicidad
Idiomas disponibles
Idiomas disponibles
5.6.3 Edit/Save Utility Functions
1.
Follow the procedure in §5.6.1 to select a parameter.
Press the EDIT/SAVE button to activate the "EDIT" mode.
2.
���������
3.
Use the rotary knob to select the option desired. When the correct option is in
the display, press the EDIT/SAVE button to save the selection.
���������
4.
Press the UTILITY button again if you wish to program an additional function,
then repeat steps 1 through 3.
50
Hipot Electrical Safety Testers Models H111 and H216
� � � �
� � � �
Publicidad
