Publicidad
Idiomas disponibles
Idiomas disponibles
5.5
Starting a Test
1.
Repeat the procedure in §5.4.1 to select a step.
2.
Press the RESET button to enter the "READY" mode.
3.
Make sure the test environment is safe.
Press the START button to start the test. When in the "TEST" mode, the RED
4.
CAUTION LED will flash.
�����
5.
If you press the RESET button, the test will stop.
46
�����
�����
Hipot Electrical Safety Testers Models H111 and H216
� � � � �
� � � �
� � � �
Publicidad
