Pool Technologie DUO Instrucciones De Uso página 35

DEFAULT DISPLAY
Settings
MODEL via the
Inline display
PRO (2)
Dashboard
(1) : If the electrolyser operating mode is set to "%".
(2) : If the electrolyser operating mode is set to "ORP».
3.5. Keyboard
COMMAND KEY
(Depending on
the model)
Switching on the electronic unit.
MENU
Turning off the electronic unit (press and hold), provided that no alarm or alert has been
triggered.
Access the menus.
Boost mode activated at 100% for a 24-hour period (with a short start-up period).
BOOST
Pool water temperature displayed for a few seconds (only if the default display is set to
T°C
pH
Select a value or data item.
Cancel a command.
Back to the previous (sub)menu.
Stopping the Boost mode.
Cancelling an alarm or alert (press and release or press and hold, depending on the alarm
or alert).
Command confirmation.
Enter a (sub-)menu.
OK
Acknowledge an alarm or alert (press or press and hold, depending on the alarm or alert).
Overview
A few minutes after turning on, the production and pH regulation start automatically,
provided that these functions are not deactivated and that certain alarms have not been
triggered.
When switching it off, the screen and the green LED turn off, and the red LED comes on.
.
ORP measurement
in operation (indicator in addition to the green light).
pH measurement
ORP measurement
displayed when
production is in operation
(indicator in addition to the
green light).
pH measurement
FUNCTION
menu (press and hold).
MEANING
is
the
Salt level
Water temperature
enu (press and hold).
10