Pool Technologie DUO Instrucciones De Uso página 42

3.7.20. Manual water injection
Menu
Priming the water pump
Water injection into the cell
Means of checking the water
pump is operating correctly
3.7.21. Manual salt injection
Menu
Priming the salt pump
Salt injection into the cell
Means of checking the salt
pump is operating correctly
3.7.22. Bluetooth communication
Menu Setting
Pairing*
* These settings do not appear if the mode is set to OFF.
During a (non-automatic) update of the electronics unit software carried out via Bluetooth:
- The 2 LEDs (red and green) flash alternately.
- The message "
Functions
Functions
Activation/deactivation of
Mode
Bluetooth communication
Detection of connectible
devices near the electronics
unit (within 60 seconds)
Networking of the
electronics unit and
connected devices
Deletion of the network
Reset* connecting the electronics unit
to the connected devices
" is displayed.
Possible settings
From 30 secs to
10 mins,
in 30 s
increments
Possible settings
From 30 secs to
10 mins,
in 30 s
increments
Function
Setting
by default
To start injecting:
Confirm the selected setting.
(The peristaltic pump is
running, and the timer
countdown is displayed in
real time.)
1 min
To pause,
and to restart injection:
Press OK.
To stop injection:
Press
Setting
by default
To start injecting:
Confirm the selected setting.
(The peristaltic pump is
running, and the timer
countdown is displayed in
real time.)
1 min
To pause,
and to restart injection:
Press OK.
To stop injection:
Press
Possible settings
ON (to activate)
OFF (to disable)
-
Instructions
.
Instructions
.
Default setting
ON
17