Pool Technologie DUO Instrucciones De Uso página 40

Sensor
activated
Cover
External
command
Flow
Empty
container
Water temperature equal to or higher than
Temperature
Water temperature equal to or higher than
* Contact a professional to modify this value.
3.7.15. Adjusting the pool water temperature
If the temperature sensor is deactivated, the following menu will not appear.
Menu
From -5°C to + 5°C, compared to the value displayed, in
3.7.16. Setting the inversion of the current powering the cell
The aim of the current inversion is to prevent limescale being deposited on the cell. The inversion
frequency must be correctly set following the table below in order to ensure that the cell continues to operate
correctly over the long term.
Menu
3.7.17. Boost mode
The Boost mode:
- allows for meeting a need for chlorine.
- sets the production setpoint up to 100%, for a fixed period.
- can be stopped manually at any time.
Boost mode cannot substitute for a classic shock treatment in the event water is unsuitable for bathing.
It is impossible to start the Boost mode if:
- An alarm has been activated. (After having resolved and dismissed this alarm, wait a few moments in order to be
able to activate the Boost mode.)
- The operating mode of the electrolytic cell is set to "OFF".
If the Boost mode is restarted manually while it is already running, the Boost mode resets for the duration
displayed.
Boost mode continues after powering off the electronics unit.
When the Boost mode is manually terminated or stopped, production continues according to the initial setpoint.
Configuration
Open cover
Closed cover
Command activated
Command not activated
Sufficient flow
Zero flow
Empty container
Container not empty
Water temperature below 15°C
(Reactor OR Pool)
15°C (Reactor OR Pool)
45°C
Possible settings
increments of 0.5°C
Possible settings
0, 12 or 24 hrs
Specific display Production
- Maintained
Divided by 5*
- Maintained
- Maintained
Maintained
- Maintained
- Sustained
Current measurement
pH
regulation
Maintained
Stopped
Stopped
Stopped
Stopped
Maintained
Stopped
Default setting
Default setting
24 hrs
15