Pool Technologie DUO Instrucciones De Uso página 39

3.7.12. Selecting the electrolyser operating mode
Possible settings
Menu (depending on the
The operating mode selected can be
3.7.13. Setting the production setpoint
Electrolyser
operating mode
% Default display
ORP
3.7.14. Sensor configuration
Menu Sensor
Cover/Ext command
Flow/pH container
Temperature
Ext command: external command.
PH container: empty container sensor.
Type: this parameter does not appear if the corresponding mode is set to OFF.
ON: sensor activated.
OFF: sensor disabled.
NO: switch normally open.
NC: switch normally closed.
model)
Continual production, as per the
%
production setpoint.
Regulation of production using the
ORP ORP probe, according to the ORP
and ORP production setpoints.
OFF Electrolyser turned off.
Menu Specific instructions
Select a value directly,
using the
(no
required).
Setting
Mode
Type
Mode
Type
-
Meaning
From
buttons
increments of 1.
confirmation
10% or OFF (depending on
the electrolyser operating
-
mode).
Possible settings
Cover
OFF
Ext control
NO
NC
OFF
pH container
Flow
NO
NC
ON
OFF
Default setting
For the UNO and DUO models:
%.
For the PRO model: ORP.
Possible settings
10 to 100%, in
Default setting
NC (pH container)
Default
setting
100%
Cover
NO
OFF
NO (Flow)
ON
14